Categories
Organization

How to clean mesh shoes

Tall Mens Fashion

How to Clean Mesh Shoes

Shoe Cleaner

The 5 best methods to use when cleaning mesh shoes are:

  1. washing machine
  2. hydrogen peroxide and baking soda
  3. white toothpaste
  4. shoe cleaner kit
  5. bleach

This is How to Clean Mesh Shoes: Top 5 Methods!

Mesh is often used to make trainers and running shoes, which means they are likely to get dirty! Mesh is used for these types of shoes because it is stylish, light, and also easy to clean.

Our article gives you 5 different methods to use when trying to clean mesh shoes. All of these methods are easy, inexpensive, and can be done at home in just a few steps.

Using the washing machine is an effective way to clean mesh shoes, if the proper guidelines are followed.

Mesh shoes can also be cleaned by using a mix of hydrogen peroxide and baking soda, which is a powerful combination for cleaning stubborn dirt and stains out of mesh shoes.

It may also surprise you that white toothpaste can be used to clean your mesh sneakers; continue reading to find out how.

If you have white mesh shoes, using bleach is an effective solution to get those awful stains out.

Continue reading below to see the step-by-step instructions for all of these cleaning methods.

Mesh shoes are a popular style choice for summertime because they’re light and airy. However, they can also be difficult to clean because of all the tiny holes in the fabric. how to clean mesh shoes with baking soda?

the best way to clean your mesh shoes is to use a gentle cleaning solution and a soft brush.

In this article, we’ll show you how to use baking soda to clean your mesh shoes and get them looking new again!

Table of Contents

There are different ways to clean mesh shoes, but most of them require harsh chemicals that can damage the fabric. Baking soda is a gentle alternative that will clean your mesh shoes without damaging them.

To clean your mesh shoes with baking soda, you’ll need:

  1. A soft brush
  2. A bowl of water
  3. Baking soda

Step 1:

Start by removing excess dirt and dust from the shoes with a brush, for this purpose use a soft brush. First, brush off any dry dirt from the shoes and then wet the shoes with a little water.

Step 2:

Make a paste of baking soda and water in a bowl. The paste should be thick enough to spread on the shoes but not too runny.

Step 3:

Use the brush to apply the baking soda paste to the shoes. Make sure to cover the entire surface of the shoes, including the soles.

Step 4:

Leave the paste on the shoes for about 30 minutes to allow it to work its magic.

Step 5:

After 30 minutes, use the brush to scrub the shoes and remove the baking soda paste. Rinse the shoes with water to remove any baking soda residue.

Step 6:

Dry the shoes completely before wearing them again.

How To Clean Colored Shoes With Baking Soda?

Cleaning colored mesh shoes with baking soda need bit of effort in order to prevent discoloration.

To clean your colored mesh shoes with baking soda, you’ll need:

  1. A soft brush
  2. A bowl of water
  3. Baking soda

Step 1:

Start by removing excess dirt and dust from the shoes with a brush. First , brush off any dry dirt from the shoes and then wet the shoes with a little water.

Step 2:

Make a paste of baking soda and water in a bowl. The paste should be thick enough to spread on the shoes but not too runny.

Step 3:

Use the brush to apply the baking soda paste to the shoes. Make sure to cover the entire surface of the shoes, including the soles.

Step 4:

Leave the paste on the shoes for about 30 minutes to allow it to work its magic.

Step 5:

After 30 minutes, use the brush to scrub the shoes and remove the baking soda paste. Rinse the shoes with water to remove any baking soda residue.

Step 6:

Dry the shoes completely before wearing them again.

Precaution:

  • Do not use hot water as it can cause the colors in the shoes to bleed.
  • Do not leave the paste on the shoes for more than 30 minutes as it can discolor them.

Conclusion:

To conclude, how to get strain out of mesh shoes? Mesh shoes are a great choice for summertime, but they can be difficult to clean. Baking soda is a gentle alternative that will clean your mesh shoes without damaging them. Follow the steps above to get your mesh shoes looking like new again!

FAQs:

Can I use baking soda to clean my white mesh shoes?

Yes, you can use baking soda to clean your white mesh shoes. Just follow the steps above and your shoes will be looking good as new in no time!

Can I use baking soda to clean my black mesh shoes?

Yes, you can use baking soda to clean your black mesh shoes. Just follow the steps above and your shoes will be looking good as new in no time!

Does baking soda ruin shoes?

No, baking soda will not ruin your shoes. In fact, it’s a gentle cleaner that will leave your shoes looking like new. Just be sure to follow the steps above and you’ll have no problems!

How to clean mesh shoes

Nike is a well-known shoe brand that is adored by people all around the world. Mesh shoes are one of the most popular styles of Nike sneakers because of their attractiveness and convenience.

That is why any shoe lover should have at least one pair of Nike mesh shoes in their collection. Mesh shoes, on the other hand, are more vulnerable to dirt, which can ruin the appearance of your shoes and make them unclean over time.

How to clean sneakers with mesh is a challenge for many people who want to make their shoes look new. White mesh sneakers are more difficult to clean than leather shoes since they absorb dirt more easily. So what do you need to do to clean white Nike mesh shoes?

This article will show you 5 simple methods to solve the question of how to clean Nike shoes with mesh: use vinegar, bleach, dish soap, shaving cream and sneaker cleaner. We also give you some tips on drying your mesh shoes properly. Find out the answer below!

Clean Mesh Shoes When They’re Dry

When the shoes are dry, slamming them on the ground and shaking them will easily remove the light stains from the dust. If you’re still unhappy, lightly brush over the dusty areas with a soft, dry brush. This will only work on dust and dry stains; liquid stains like chili sauce or coffee will not work. You should execute this step first to ensure that the shoes are clean before moving on to the following stage.

Note: Don’t rub so hard on your mesh shoes or else the mesh will be damaged. Just use a soft brush and gently scrub the unclean areas. And make sure your shoes are dry for the best result.

5 Easy Ways to Clean Running Shoes With Mesh

How to clean mesh shoes

For stubborn stains, you need to find more effective methods to deal with it. And 5 procedures to clean running shoes with mesh we introduce below will help you make the mesh shoes rejuvenate!

1. Using Vinegar to Clean White Mesh Shoes

Vinegar is a useful and familiar trick to clean, which you can find anywhere. Besides white vinegar, you need to prepare a spray bottle and a soft brush.

    Step 1: Fill white vinegar into the spray bottle and spray them on the dirty areas. Step 2: Use a soft brush to scrub your shoes gently. Step 3: Dry the shoes under direct sunlight for 1 or 2 hours. Step 4: If the stains do not improve, add vinegar once again to make your shoes wet and sprinkle baking soda on them. Step 5: Rub the dirty areas and rinse with water.

2. Using dish soap to clean the Nike mesh shoes

It is easy to use dish soap to clean your Nike shoes because you always have dish soap available at home. And the process is very simple as below:

    Step 1: Apply the dish soap and a few drops of water to the stains. Step 2: Scrub the shoes with a toothbrush until you see it’s foamy on the dirty areas. Step 3: Rinse with water until the shoes are totally clean.

3. Shaving cream can help to clean Nike white mesh shoes

Shaving cream is not well-known to have a cleaning effect, but it can help get rid of the stains on mesh shoes. Be mindful to choose the white foam kind instead of gel shaving cream. And here is the process:

    Step 1: Put a little shaving cream on the dirty areas. Step 2: Use a cloth or soft brush to rub the shoes in a circular motion. Step 3: Leave the shoes for 30 minutes. Step 4: Check the stains, if the result is not better, leave the shoes with shaving cream overnight. Step 5: Rinse the shoes with water and wash them with a wet cloth.

4. Clean white mesh shoes with shoe cleaner

Shoe cleaner is a biodegradable solution that will clean mesh shoes perfectly. Only a small amount is required to keep shoes as clean as new. Many companies tailored this sneaker cleaner for white mesh shoes, which you can buy online or at shoe stores.

All you need to do is apply the sneaker cleaner on dirty stains and rub them with a soft brush. After the stains fade, rinse the shoes with water and dry them in a ventilated room. This product even works on the shoe soles for the best result.

5. Bleach can be used for white mesh shoes

How to clean mesh shoes

Bleach should not be used on mesh shoes since the strong cleaning action can damage the delicate fabric. If all other methods fail to remove the stains from your shoes, you can attempt bleach, but do so at your own risk. To complete the cleaning process using this method, you will need a washing machine.

    Step 1: Put dirty shoes in the washing machine (prefer using a washing bag to protect the shoes) Step 2: Pour ¼ cup of bleach into the washing machine and turn on the washing process. Step 3: Take out the shoes and dry them in a ventilated room.

How to Dry Mesh Shoes Properly

How to clean mesh shoes

You now know how to clean tennis shoes with mesh, but that is only half of the story. Mesh shoe drying is also an important process that you should be aware of. Because mesh sneakers are sensitive, you should avoid using a hair dryer to dry them. The mesh will be severely damaged by the direct heat. And here is the instruction recommended by some experts to protect your mesh shoes:

    Step 1: Put dry paper towels or old newspaper inside your shoes (Newspaper is not highly recommended as it may leave ink smears on the shoes) Step 2: Let your shoes air-dry overnight. Step 3: Take out the towels and leave the shoes until they are completely dry.

You can dry mesh shoes under the sunlight to eliminate the bacteria and stinky smell. However, too much sunlight might cause the mesh to dry out, causing your shoes to lose their shape. As a result, while drying in the sun, choose a location where the sun is moderate, as this will be better for your mesh shoes.

Conclusion

You are armed with 5 methods on how to clean Nike shoes with mesh and the process to dry them properly. It is preferable to progress from a soft to a stronger strategy until you achieve the greatest results for your shoes. Remember, those mesh sneakers are quite delicate, and you must always be cautious to avoid destroying your favorite pair. Hopefully, you’ll be able to keep the Nike mesh shoes as clean as fresh so that they can be your faithful travel buddy.

Shoes add beauty to your outfit. White mesh Nike shoes are fashionable shoes suitable for all outfits and add grace to your look. However, cleaning your white mesh shoes is a bit tricky.

Here are the ways on How to clean and clear dirt on white mesh Nike shoes:

1. Remove your shoelaces:

Removing shoelaces before cleaning the outsole helps clear the mud and the dirt at the lace position easily. Slowly, remove the laces from the outsole and wash them separately using detergent.

2. Clean the dust using a brush:

It is highly easy to clean the dry dirt or mud using a brush. So, use the medium-sized bristles brush to clean the shoes. Gently rub the shoes with minimal force. High pressures while brushing may damage the mesh and allow the dirt particles to go even deeper.

3. Use detergent and water to clean your shoes:

After cleaning dry impurities, you can clean the white mesh using detergent and water to clear all the stains and marks further. With the help of wet damped cloth and detergent mixture, start rubbing over your white mesh outsole. Gently rub the outsole until you feel the entire shoe is free from scuff marks and stains. After rubbing, put them aside and allow them to dry naturally.

4. Put them in the washing machine:

Basically, mesh shoes are machine washable. If you feel the manual rubbing is difficult and time taking, you can also put them in a washing machine to get rid of stains. Adding hydrogen peroxide in small quantities in detergent water in the washing machine clears all the impurities on your mesh white Nike shoes. And make them clean and tidy.

5. Add bleaching to clean midsoles:

The midsoles of your shoes are highly resistant to bleaching. So clean your midsoles with the help of bleaching powder. Apply a thick consistency of bleaching powder and water on your midsole using a wet cloth and then rub gently to remove leftover stains.

6. Allow your shoes to dry:

After cleaning all the strains over your mesh outsole, allow your shoes to dry naturally. Do not use dryers to dry your shoes because heat can cause damage to your mesh shoes. Also, keep in mind that don’t use bleach on the mesh surface as bleach can damage your white mesh outsoles.

7. Add baking soda to deodorize your shoes:

Sprinkle baking soda inside your shoes to keep your insoles free from bad odors and allow your feet to feel fresh. Repeat these steps to both the shoes and remove all the impurities and dirt particles.

Conclusion

Looking after white mesh, Nike is hard, but you can bring back your shoes’ lustrous shine by proper cleaning. I am sure that this article about How to clean white mesh Nike shoes helps you to clean your shoes and get back your shoes to the wardrobe.

Do you need help with order?

Or were you searching for the size guide?

HOW DO I CARE ABOUT MY RUNNING SHOES?

Altra running shoes are designed to give you the best performance and feeling on trails and road. As any technical piece they need a little attention to make sure their performance features are maintained over time and you get those extra miles from it. Luckily taking care of your best running companion is not complicated and laborious. You just need to follow a few easy steps:
– Keep your outsole free of debris in order to not compromise traction
– Clean seldomly the upper to avoid particles of dirt working their way into the mesh and fabric.
– Don’t submerge/soak your shoes in the water as it may compromise and deform the performance and materials
– Do not use washing machine as it can be too aggressive
– Do not use any heat (sunlight, dryer) to dry your running shoes because it can affect the materials

HOW CAN I CLEAN MY ALTRAS?

When it’s time to give your shoes a clean we suggest you to treat each piece of your shoes separately, so begin from taking out insoles and shoe laces. Then, hand wash each piece separately (insole, upper and outsole) helping yourself with the use of a delicate cloth (and a brush for the more aggressive dirt), mild soap and warm water. After each piece is cleaned, we suggest you to let them dry in a place with mild temperature and low humidity. If you want to speed drying you can stuff newspaper or paper towels into your shoes. Never put your shoes in a dryer or near any heat source as high temperature can distort shapes and modify components.

How to clean mesh shoes

Keeping your running shoes clean keeps them looking good. More importantly, it also can extend their life and keep the traction in tip-top shape. Although you might be tempted to throw your ASICS in the washer or dryer, that risks interfering with the construction of your shoes.

Instead, you’ll need a few simple tools, including a soft-bristled brush like a vegetable brush, mild soap or special footwear cleaner, and a hose or sink. Unless you run through heavy muck, you’ll probably only need to do this every few months. There are a few simple steps to follow, and then your shoes will be clean, fresh, and ready for your next run.

Clean the Outsoles

The treads of your shoes can accumulate serious buildup. Keeping them clean not only improves traction, but also minimizes the chances that you’ll track invasive species of plants into areas they don’t belong. Start with running shoes that are totally dry. Use a brush to loosen up caked-on debris, and clear the treads of any gunk. If you’re having a tough time getting it off, use a hose or faucet to rinse over the outsoles and scrub them again until everything’s clean.

Clean the Uppers

Once you’ve got the outsoles clean, it’s time to tackle the uppers. If you have a lot of debris inside the shoes, use your vacuum to clear it out. Then, take the laces out of each shoe. Take any liners and the insoles out of the shoes and set them aside. Use a simple soap and water solution or a cleaner made especially for athletic shoes to scrub the uppers. Rinse them thoroughly until the water runs clean. If you have waterproof running shoes, refresh the waterproofing on the fabric.

Insoles 101

As you run, you sweat. The insoles absorb a lot of that sweat, along with any moisture that may leak in otherwise. That creates a breeding ground for bacteria. And that bacteria is what leaves your running shoes smelling funky. But with regular cleaning, you can minimize odor.

There are three popular ways to clean insoles. Use mild soap and water, a mixture of baking soda and water, or a mix of water and vinegar. Scrub the insoles with your preferred cleaner. Rinse them until the water runs clear and there are no suds. Then, set them aside to let the insoles dry.

Are your insoles particularly funky? Fill a sink or small bucket with an equal measure of white distilled vinegar and water. Add a few drops of tea tree oil, which has antibacterial properties. Let the insoles soak for three hours before rinsing them in fresh water and allowing them to dry thoroughly overnight.

Let Those Shoes Dry

Letting your running shoes dry completely is every bit as important as any other step. Don’t place them near a heat source or in a clothes dryer, both of which can cause them to lose their shape or damage the adhesives in the construction of the shoes. Ideally, place them in a spot with plenty of ventilation and low humidity. If you need to speed things up, place wadded-up newspapers into the shoes or place them near a fan while they dry.

Once they’re dry, use polish or leather conditioner to touch up and protect leather running shoes. If you have fabric shoes, consider using a protective spray to help keep them stain- and dirt-free between cleanings.

Scuffs, caked mud, and grass stains on your running shoes are marks of pride. A little dirt here and there shows they’re getting good use, but don’t let it get out of control. Here’s how to clean running shoes and extend their life.

Rub-a-dub-dub, keep them out of the tub

First things first — do not, we repeat, do not machine wash or dry your shoes. Doing so seems like an easy way to get your running shoes clean but cutting corners in this way might set you back a pair of shoes. Tossing them in a spin cycle will definitely degrade the shoe material and could even damage your washer or dryer. Many newer washing machines have a hand-wash setting, but we recommend you just say no to machine cleaning your shoes in general.

It’s best to clean running shoes by hand, and all you need is some mild detergent and a damp cloth or brush. Follow the steps below to get your shoes looking squeaky clean:

1. Brush the bottom of your shoes to remove as much mud and dirt as possible.
2. Remove the shoelaces.
3. Gently use a damp cloth or brush to clean the uppers.
4. Rinse with warm water.
5. Remove the insoles and clean and dry them separately.
6. Stuff your shoes with newspaper. This helps them maintain shape and decreases drying time.

Following these steps will not only keep your shoes looking good but will help remove bacteria that cause offensive odors in your shoes.

When to clean your running shoes

There isn’t really a set time frame in which you should be cleaning your shoes — it depends more on the kind of running you’re doing.

If you’re on the trail, it’s a good bet that your shoes are picking up all kinds of mud and dirt. Of course, that’s not fun to look at but the bigger problem with mud is a loss of traction. Carrying a big ol’ cake of mud on your soles can put you at risk for slips and injuries. If you’re on the trail often, you should clean your shoes regularly to make sure they don’t impede your run. You’re not really going to encounter much dirt and mud if you’re a road runner, so your cleaning regimen may be based around combatting bad smells.

The general rule for when to clean running shoes is to do so when you notice a change in the way they feel, like if you’re carrying mud that outweighs your footwear, or if you start to notice that they’re beginning to smell.

Letting go

There comes a point in the runner-shoe relationship when it’s simply time to part ways. No amount of cleaning can resurrect a shoe that’s past its prime. Worn down shoes cannot properly support your joints. If you notice your legs and feet are extra tired after a regular workout, it may be time to replace your running shoes.

How to clean mesh shoes

How to clean mesh shoes

How to clean mesh shoes

The Spruce / Fiona Campbell

  • Working Time: 15 – 30 mins
  • Total Time: 15 mins – 1 day
  • Skill Level: Beginner

Athletic shoes with fabric uppers, including wool uppers like those on Woolloomooloo styles, typically can be cleaned in a washer to keep them looking like new. However, there are some important things to know before washing tennis and athletic shoes. First, always check the manufacturer’s instructions to verify that the shoes are washable. Then, if you have a standard top-loading washing machine, always clean the shoes with a load of towels to help balance the machine. In a front-loading machine or high-efficiency, top-loading machine with no center agitator, there’s less need to balance the load.

When you’re ready to wash your athletic shoes, follow these general steps to get the job done right.

How Often to Clean Tennis and Athletic Shoes

Tennis and athletic footwear generally requires cleaning every few months. Fortunately, washing most athletic shoes is easy and takes only a few simple steps. Before you wash your shoes, vacuum them inside and out with a brush attachment to remove any loose dirt or stones from hard-to-reach crevices.

” data-caption=”” data-expand=”300″ data-tracking-container=”true” />

Are you a golf player but not sure of how to clean golf shoes? Well, whether you are a beginner or an expert golfer, you need to know how to clean your golf shoes. Golf shoes are usually made of synthetic material or leather, which are materials that are prone to dirt when playing. Moreover, these shoes are very expensive, and you wouldn’t want to ruin them because of dirt. If you want to extend their lifespan, then you need to keep them clean.

Proper care is crucial when it comes to maintaining a good look, performance, comfort, and feel of the golfing shoe. Considering the numerous hazards facing both synthetic and leather golf shoes, you need to clean them thoroughly to keep it safe. Here is how you can do that!

Remove the shoelaces

Before any other thing, remove the shoelaces to keep the shoe ready for cleaning. Never clean your shoes with laces on.

Bottom-line

As you remove the laces, make sure you remove the insoles too, if they are removable. Then, it’s time to clean your shoes.

Remove dirt and residue on the shoe

Use a mild soap or a shoe cleaner to clean your shoes, removing grass, dirt, or any residue on the shoe. If your shoe is white, use a white shoe cleaner to make sure all the scuff marks are out-of-the-way.

Bottom-line

Removing dirt and residue first leaves room for proper cleaning since dirt can get in the way of cleaning.

Wash your shoes now

Once you remove the dirt and other debris on the shoe, take clean water and add shoe cleaner or mild soap to clean the shoe thoroughly. While dark leather golf shoes are easy to clean with a shoe cleaner or a cream with the same color, white shoes need a shoe cleaner for white shoes to make sure that the shoe is properly conditioned.

Bottom-line

Once the shoe is clean, leave the shoe to dry under room temperature, and avoid drying the shoe on the sun.

Clean your mesh golf shoe

If your golfing shoe is a mesh one, then you need to add liquid soap or even a laundry detergent into warm water. After that, soak your shoes for several minutes. Then, use a soft brush or a rag to scrub the mesh to remove any dirt or residue. After that, dip a cloth in cold water and blot the mesh to remove soap residue.

Bottom-line

Leave your shoes to dry in the room or in an area that does not have direct sunlight.

Treat the shoes with leather oil

After cleaning your shoes, now it’s time to treat them. Once you clean them, to make sure that they keep their shine you need to treat them. Just apply a small amount of leather oil on the outer soles and the uppers. Put a few drops of the oil on a polishing cloth and massage the mixture on both shoes.

Bottom-line

With leather oil, your shoes will not only shine but will last longer as the uppers are less likely to crack and wear out.

Storing your shoes

After cleaning your shoes, make sure you store them well. You can only put them on a cedar shoe tree so that you can support the shoe’s shape and to also absorb any odor or moisture.

Bottom-line

Direct sunlight can harm your shoes, and that’s why you need to store them in a shaded place to avoid direct sunlight.

Shoes are as important as other golfing equipment, and that is why proper care is essential. Just follow the above tips, and you will enjoy playing golf on comfortable and fresh shoes.

I remember my first pair of all white shoes. My Mom took me to the mall with my younger brother and older sister for “back to school” shopping. I saw them sticking out like a shiny pearl among all of the colorful and robust sneakers. They were bright, clean, and most importantly; beautiful. However, Mom knows best, and Mom knew they were not going to stay clean. She said, “You don’t even know how to clean white mesh Nike’s on your feet right now!” Right again as I looked down at the dirty white mesh on my Nikes.

However, Just outside of the Store was a young man selling Shoe MGK. The product blew us away and my mom bought The MVP Kit to keep my shoes clean. Since 1992, Shoe MGK has been providing the best shoe cleaner to hardworking Moms like my own and sneakerheads like myself. To this day, my favorite shoes are my white mesh Nike’s with the red and blue side stripe. I always keep them clean with the Shoe MGK All-Star Kit.

Here is the step by step guide for how to clean white mesh Nike’s:

1. Start by setting aside a small bucket of water and getting your bristle brush nice and wet.

2. Apply a small amount of Shoe MGK Cleaner and Conditioner to the wet brush and gently lather the solution into the shoe. Start with small areas and brush in small circles.

1. Once you see the solution begin to bubble and become soapy, wipe the shoe clean with a dry towel.

The All-Star Kit also features the incredibly popular and powerful Touch-Up White. Shoe MGK Touch-Up is touch up paint for your shoes that restores the brilliant white color. It applies a tough coating to help shoes endure heavy wear and tear. The formula includes a special blend of agents that enrich and brighten to make your shoes and soles look like new.

3. Use the Touch-Up White applicator on tough stains, scuffs, and yellowing soles. Be careful when applying; make sure to only use it on white materials. Wipe clean.

2. Take the Shoe MGK Water and Stain repellent and spray thoroughly and evenly on the entire area of the shoe. This product will even lift stubborn stains, scuffs, and oils. Let dry completely.

Cleaning white mesh Nike’s is not always easy. Sometimes I fall in love with the scuffs or the way that one puddle has left my shoes with dull yellow soles, and then I snap out of it. Keep your White mesh Nike’s freaky fresh with Shoe MGK: the world’s greatest White Sneaker Cleaner. Respect. Your. shoes.

How to clean mesh shoes

White shoes and sneakers are a staple in most closets: the ideal versatile shoes that go with almost every outfit and look great—as long as they’re perfectly clean.

If your favorite pair of white shoes is looking dingy, stained, or dirty, follow one of these tried-and-true methods to clean them using baking soda and other eco-friendly household products.

Considerations Before Cleaning Your White Shoes

There are a few important aspects to take into consideration before you start any of the cleaning protocols below.

The first step in cleaning your white shoes should always be to remove the excess dirt. The best way to do this is to brush it off while it’s dry—getting dried dirt wet will turn it into a muddy mess.

Leather shoes (or leather details on a shoe) need a different cleaning and whitening method than canvas. Knit or mesh materials like those found in some athletic shoes also need special consideration, so take note of what your shoes are made of to figure out the best way to clean and whiten them up.

Baking Soda and Detergent Scrub

How to clean mesh shoes

This technique works best on canvas. Scrubbing lightly might work on knit material or leather, but it could also scratch the leather or damage the knit, so be more gentle with all-over leather or leather detail.

First, make a 50/50 mixture of a tablespoon of laundry detergent and a tablespoon of baking soda in a shallow bowl or small plate.

If the shoes are dry, wet the outside of the shoes—they don’t need to be soaking, just moderately wet. Then, dip a nail brush, old toothbrush, or dish brush into the detergent/baking soda mix and start scrubbing. Cover every part of the shoe that’s dirty, and keep re-dipping into the pasty mix as needed.

Let sit for 20-30 minutes, then rinse out under a running tap or in a bucket of water (or throw into the washing machine). Hang to dry in the shower or sunshine for an extra blast of natural whitening power.

Hydrogen Peroxide and Baking Soda

How to clean mesh shoes

Another effective way to get your white canvas or knit shoes bright again without bleach is to make your own version of an oxygen cleaner—but this one works best on a sunny day, so plan ahead.

Make a paste of 1 tablespoon baking soda, half a tablespoon water, and half a tablespoon hydrogen peroxide (yes, the same kind that you get at the pharmacy to put on cuts).

Using an old toothbrush or nail brush, gently scrub that paste into your white canvas or knit material sneakers. Then repeat, so you have a thick paste on each shoe.

Set in the sun for 4-5 hours. The paste should be totally dry and flaking off the shoes. Then, vigorously brush off the dry paste. Your shoes don’t need to be washed—you can try wearing them right away.

A Good Wash and Sunshine

How to clean mesh shoes

The first place to start with yellowed or generally dirty shoes of knit material, canvas, or canvas with leather detail—or pretty much any kind of human-made type of material—is a simple wash and dry.

First, remove laces and insoles (if they are removable) and fill a bucket or small tub with warm water and a tablespoon of laundry detergent. Holding the shoe by the toe or the back heel, swish it around in the soapy water for a few minutes. Let it sit for a few minutes, swish again, then rinse under warm water. Repeat. Or, use your washing machine (it won’t be too water wasteful as long as it has a load sensor). In both cases you can toss the insoles in, too.

After the second wash-rinse cycle (machine or by hand) let the shoes drip-dry in the tub or outside. If you can let them dry in the sunshine, this will help them get even whiter. You might find a good washing is enough to get your shoes white again.

If, before you dry the shoes, you think they are not white enough yet, try the scrubbing technique described in the the first method.

simple – practical – effective

How to clean mesh shoes

We all love a brand new pair of Skechers. Classic style and outstanding comfort make them the perfect casual shoes for everyone. Add a touch of glamour to casual look wearing white Skechers with stitching and overlay accents. We show you how to clean Skechers shoes, to keep them looking at their best.

How to Make Your Skechers Sneakers Last Longer

Fortunately, there are some inexpensive tricks to extend the life of your sneakers in the best shape. With proper care and professional treatment, you can extend the life of your favorite Skechers pair for months.

Invest in professional cleaning products to pre-treat your sneakers and keep them white for longer.

Skechers Rain and Stain Waterproof Spray

Before wearing spray your new Skechers with Rain and Stain Waterproof Spray. It is a special eco-friendly solution to protect your footwear from stains and any type of liquids. Works well for all fabrics: leather, canvas, and suede.

Directions:

  • Test for colorfastness on a small hidden area of your shoes before use;
  • Make sure your sneakers are clean and dry;
  • Shake well and spray thoroughly all over the shoes;
  • Leave it to dry overnight or at least for 8-12 hours away from direct sunlight. A second coat is highly recommended.

Skechers Shoe Care Odor Eliminator Spray

Skechers Shoe Care Odor Eliminator Spray is the official anti-odor formula to deodorize and freshen your shoes. The eco-friendly mixture destroys the bad smell in every type of footwear. Make sure to use it in a well-ventilated area.

Directions:

  • Spray thoroughly and allow to air dry before wearing.

Skechers Shoe Care Athletic Cleanser Gel

Use a shoe conditioner to remove dirt and surface stains. Apply it regularly to nourish and brighten footwear fabrics, and make your shoes to look like new in just a few minutes. It is safe on all types of shoes.

Directions:

  • Shake well before use;
  • Apply on a clean cloth or sponge;
  • Scrub evenly all over the shoe with a soft brush;
  • Use a dry cloth to wipe away the excess solution;
  • Let it air dry completely away from direct sunlight.

Five Rules to Keep Your Skechers Looking Brand-New

The First Rule

Hand washing in cold water with a mild detergent is strongly recommended for all non-leather sneakers. If you don’t want your white sneakers turning yellow, choose natural washing solutions and do not expose your shoes to sunlight while drying.

Skechers Memory Foam™ insoles should be also hand washed and naturally air-dried for 10 – 12 hours. Never put wet insoles in the shoes.

Performance Skechers: Skechers GOwalk & Skechers GOrun

Avoid machine washing and try to hand washing in warm soapy water with a drop of dishwashing detergent. Dip a toothbrush or cotton cloth in the solution and gently rub off the dirt.

Remove grease from the outsoles with a soft brush. Rinse off with clear water the excess soap. Allow the shoes to air dry for at least 12 hours.

A piece of advanced mesh fabric on the upper of Skechers should be treated with special care using professional solutions for Nylon and Mesh Shoes and soft bristle brush for the mesh.

Check our Top Rated Mesh Shoes Care Products here.

Leather Skechers: Go Golf

For smooth leather Skechers, you will need a neutral shade shoe cream or conditioner. Wipe the grime off with a wet cloth and apply a leather cleaning conditioner.

All Skechers Go Golf is fully waterproofed, so you don’t need to apply any protectant on them. To soothe leather upper, use a lotion or leather oil once a month to keep the leather supple.

Do not machine wash leather sneakers. Read more on how to clean leather sneakers in our detailed Leather Care Guide 101 here.

Suede Skechers

Suede is a delicate fabric, so apply a protectant such as Skechers Water Proofer Spray to save the shoes from rainwater and dirty stains. Do not machine wash and heat dry suede shoes.

Any source of direct heat like a hairdryer, fireplace, or radiator might damage your shoes. Stuff the shoes with paper towels and let them air dry at room temperature. Use a shoe tree to maintain shoe shape when stored.

When shoes should be cleaned, brush away dirt with a suede brush or a soft bristle brush to keep the nap uplift. Stubborn stains should be treated with professional stain remover suitable for suede material. Consider purchasing an essential suede cleaning kit online.

As mentioned above, use a protectant such as Skechers Water Proofer Spray to preserve the shoes from stains and water before wearing in the rain.

Light-Up Skechers

Treat your favorite lighted Skechers with mild dish soap, warm water, and a microfiber cloth. Do not machine wash light-up, contact with water will damage the lights.

How to clean mesh shoes

How to clean mesh shoes

I put mine in washer. Let air dry.

Spray on laundry products, then wash in the machine as usual.

Spray with laundry stain remover – put in washer. Yu can also place them in a mesh bag – then in washer. They let dry – no drier.

White mess you can throw those in the machine in a pillowcase tied the knot on the top and you can wash them with regular clothes even with a little bleach

Suggested Project Book

How to clean mesh shoes

Transform Old Cutting Boards Into These 12 Nifty Items
Related Discussions
How to clean burns on stainless steel pans?

Help! I burned my pan. How do I clean stainless steel cookware that’s been burned?

How to clean mesh shoes

How to clean a mirror without streaks?

Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won’t leave streaks. See more

How to clean shower doors

How to clean glass shower doors

How to clean my kitchen cabinets from grease?

My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don’t have to cringe every time I glance at my cabinets.

Proper care and attention is required to maintain and prolong the look, performance, feel and comfort of golf shoes. Faced with a wide range of hazards, both leather and synthetic golf shoes must be thoroughly cleaned and properly stored between rounds in order to prolong the look and life of the shoes.

  • We recommend rotating shoes between rounds – properly maintained the rotation of two pairs of shoes will last much longer than twice the life of a single pair.
  • Use a shoe horn when putting on your golf shoes to protect the heel counter of the shoe.
  • Check your cleats between rounds to ensure they are intact and secured properly into their respective receptacles, but DO NOT OVER TIGHTEN your cleats.
  • Do not store your golf shoes in your car boot, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.
  • We strongly recommend leaving Cedar shoe trees in your golfing shoes at all times when shoes are not in use.

Cleaning Guidelines

  1. Pre-Round Shoe Care
  2. Post-Round Shoe Cleaning & Care
  3. Cleaning Mesh Shoes
  4. Cleaning Men’s HyperFlex
  5. Cleaning Women’s emPower

Pre-Round Shoe Care

Use a shoe horn when putting on your golf shoes. This will protect the heel counter of the shoe. Damage to the heel counter can cause improper fit in the heel which can lead to blistering and overall discomfort.

Post-Round Shoe Cleaning & Care

Uppers

Clean leather or synthetic golfing shoes after each round by removing dirt and residue using FootJoy shoe cleaner or mild soap and water. Allow to air dry at room temperature.

White Shoes: To clean shoes with a white base leather, apply FootJoy white cleaner to remove unwanted scuff marks. This will also condition the leather.

Dark Shoes: To clean shoes with a dark base leather use a combination of FootJoy shoe cleaner and an applicable colour shoe creme to maintain the look and conditioning of the full grain or calfskin leather.

Wet Shoes: If your shoes become soaked during a round,

  1. Clean them quickly.
  2. Place crumpled newspaper inside for 8-10 hours to soak up all excess water.
  3. Remove newspaper and replace with FootJoy Cedar Shoe Trees. Cedar shoe trees will bring the uppers back to normal shape, smooth the linings and absorb any remaining water and odor. The absorption properties of cedar make them far more effective than plastic shoe trees.
  • Remove the laces when cleaning.
  • If not glued into the shoe, remove the inner sole when cleaning your golf shoes.
  • Do not place your shoes in direct sunlight to dry, but rather allow them to air-dry in a shaded area or indoors.
  • NEVER dry your shoes using a blow-dryer or by putting them on any external heat source. Excessive heat can damage both the uppers and the outsoles.

Outsole Care

All non-leather outsoles should be wiped clean of dirt and residue after every round.

Check to ensure that all cleats are intact and secured properly into their respective receptacles.DO NOT OVER-TIGHTEN THE CLEATS.

Do not store your golf shoes in your car boot, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.

Cleaning Mesh Shoes

Hand Cleaning Mesh Shoes

  1. Soak in the sink with a squirt of liquid dish soap or laundry detergent and warm water.
  2. Dip a soft cloth or soft-bristled cleaning brush in the soapy water. Scrub the mesh to remove dirt, dust and residue.
  3. Blot or dab at the mesh with a cold water dampened cloth to remove soap residue.
  4. Allow the golf shoes to air dry. Do not place the shoes directly in the sun, but rather allow them to air-dry in a shaded area or indoors.

Machine Cleaning Mesh Shoes

  1. Remove the shoelaces. Also, if they aren’t glued into place, remove the inner soles.
  2. Wipe the mesh lightly with a clean cloth, using soap and warm water (not hot).
  3. Scrub tougher stains with an old toothbrush and a gentle laundry detergent.
  4. For a final clean on mesh shoes (to help tackle persistent stains), put the mesh golf shoes and laces in a mesh washing bag, and place in the washing machine. Wash on a gentle or delicate cycle.
  5. Allow them to air-dry. You can add newspaper initially to absorb moisture for 30 – 40 minutes. Remove the wet newspaper and add shoe trees when still damp to maintain their shape.

Cleaning Men’s HyperFlex

Here is a video to demonstrate the best way to clean your HyperFlex men’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of golf shoes are cleaned, remove the fit-beds and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the fit-beds.

Cleaning Women’s emPower

Here is a video to demonstrate the best way to clean your emPower women’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of shoes are cleaned, remove the fit-beds and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the fit-beds.

Call Us

You can reach FootJoy by calling one of the following numbers:

For Returns and Warranty issues call 0800 36 36 72 (option 6)

For New Sales and Existing Orders call 0800 616198

Last updated: September 25, 2018

White-soled sneakers are all the rage in the fashion world, forget about people who actually exercise. The issue is, white-soled sneakers are hard to keep in near-new condition, which means pretty much as soon as you get them out of the box, you’ll be committing a fashion faux pas. Even if you wear your running shoes for working out, you still want them to look on point. So, here’s how to clean running shoes and keep those white soles looking white!

Cleaning White Running Shoe Soles

  • 1 part Baking Soda
  • 1 part Laundry Detergent.

Mix this well and apply to the dirty areas on your sole with a cleaning toothbrush. Scrub well until the area looks clean. Finally, take a clean sponge or cloth, dip it in water and wipe away the soapy area to ensure all of the cleaning solution comes off. This is important since you don’t want your clean soles to have any leftover soap residue left behind. Dry with a microfiber cloth. There are some people that suggest using a Magic Eraser to do this job, I haven’t tried this because I don’t want to potentially ruin the soles of my shoes (these erasers are quite abrasive). If you do want to try this, make sure you test it in an inconspicuous area first.

For Quick Spot Cleans

Never Have Smelly Shoes Again

Lovely Laces

How To Clean Your Running Shoes

Because there are so many brands and styles there are lots of different rules about cleaning your running shoes. The first step is to find out what the manufacturer of your shoes specifically recommends. Some materials simply cannot get wet, so cleaning them may not be an option! However, here are some general guidelines on how to clean running shoes.

  1. Begin by removing dirt. Choose a dry brush with softish bristles, tip your shoe down and start to brush the dirt off, letting it fall to the ground.
  2. Mix up a solution of: 1 teaspoon of laundry detergent, and 1 cup of water.
  3. Dip a cleaning toothbrush into this solution and begin to clean the mesh, fabric and rubber areas by simply brushing in the solution.
  4. When done, take a clean sponge or cloth dipped in water and wipe off any suds.
  5. Allow to air dry naturally.
  6. Alternatively, some running shoes can simply be machine washed, so… easy-peasy!

So now you know how to clean your running shoes and keep them looking—and smelling—on point!

Proper care and attention is required to maintain and prolong the look, performance, feel and comfort of golf shoes. Faced with a wide range of hazards, both leather and synthetic golf shoes must be thoroughly cleaned and properly stored between rounds in order to prolong the look and life of the shoes.

  • We recommend rotating shoes between rounds – properly maintained the rotation of two pairs of shoes will last much longer than twice the life of a single pair.
  • Use a shoe horn when putting on your golf shoes to protect the heel counter of the shoe.
  • Check your cleats between rounds to ensure they are intact and secured properly into their respective receptacles, but DO NOT OVER TIGHTEN your cleats.
  • Do not store your golf shoes in your car trunk, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.
  • We strongly recommend leaving Cedar shoe trees in your golfing shoes at all times when shoes are not in use.

Cleaning Guidelines

  1. Pre-Round Shoe Care
  2. Post-Round Shoe Cleaning & Care
  3. Cleaning Mesh Shoes
  4. Cleaning Men’s HyperFlex
  5. Cleaning Women’s emPower

Pre-Round Shoe Care

Use a shoe horn when putting on your golf shoes. This will protect the heel counter of the shoe. Damage to the heel counter can cause improper fit in the heel which can lead to blistering and overall discomfort.

Post-Round Shoe Cleaning & Care

Uppers

Clean leather or synthetic golfing shoes after each round by removing dirt and residue using a shoe cleaner or mild soap and water. Allow to air dry at room temperature.

White Shoes: To clean shoes with a white base leather, apply white shoe cleaner to remove unwanted scuff marks. This will also condition the leather.

Dark Shoes: To clean shoes with a dark base leather use a combination of a shoe cleaner and an applicable color shoe creme to maintain the look and conditioning of the full grain or calfskin leather.

Wet Shoes: If your shoes become soaked during a round,

  1. Clean them quickly.
  2. Place crumpled newspaper inside for 8-10 hours to soak up all excess water.
  3. Remove newspaper and replace with FootJoy Cedar Shoe Trees. Cedar shoe trees will bring the uppers back to normal shape, smooth the linings and absorb any remaining water and odor. The absorption properties of cedar make them far more effective than plastic shoe trees.
  • Remove the laces when cleaning.
  • If not glued into the shoe, remove the inner sole when cleaning your golf shoes.
  • Do not place your shoes in direct sunlight to dry, but rather allow them to air-dry in a shaded area or indoors.
  • NEVER dry your shoes using a blow-dryer or by putting them on any external heat source. Excessive heat can damage both the uppers and the outsoles.

Outsole Care

All non-leather outsoles should be wiped clean of dirt and residue after every round.

Check to ensure that all cleats are intact and secured properly into their respective receptacles.DO NOT OVER-TIGHTEN THE CLEATS.

Do not store your golf shoes in your car trunk, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.

Cleaning Mesh Shoes

Hand Cleaning Mesh Shoes

  1. Soak in the sink with a squirt of liquid dish soap or laundry detergent and warm water.
  2. Dip a soft cloth or soft-bristled cleaning brush in the soapy water. Scrub the mesh to remove dirt, dust and residue.
  3. Blot or dab at the mesh with a cold water dampened cloth to remove soap residue.
  4. Allow the golf shoes to air dry. Do not place the shoes directly in the sun, but rather allow them to air-dry in a shaded area or indoors.

Machine Cleaning Mesh Shoes

  1. Remove the shoelaces. Also, if they aren’t glued into place, remove the inner soles.
  2. Wipe the mesh lightly with a clean cloth, using soap and warm water (not hot).
  3. Scrub tougher stains with an old toothbrush and a gentle laundry detergent.
  4. For a final clean on mesh shoes (to help tackle persistent stains), put the mesh golf shoes and laces in a mesh washing bag, and place in the washing machine. Wash on a gentle or delicate cycle.
  5. Allow them to air-dry. You can add newspaper initially to absorb moisture for 30 – 40 minutes. Remove the wet newspaper and add shoe trees when still damp to maintain their shape.

Cleaning Men’s HyperFlex

Here is a video to demonstrate the best way to clean your HyperFlex men’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of golf shoes are cleaned, remove the Fit-Bed® insole and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the Fit-Bed® insoles.

Cleaning Women’s emPower

Here is a video to demonstrate the best way to clean your emPower women’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of shoes are cleaned, remove the Fit-Bed® insoles and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the Fit-Bed® insoles.

Call Us

You can also reach FootJoy by calling our Consumer / Warranty line at:

(800) 663-0929
M-F 8:30 am to 4:30 pm EST.

We’re an affiliate

We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!

It feels very unpleasant when our beloved sneakers or shoe soles get yellowed .so how can you clean your yellow soles? Here I am to help you get your yellow soles whitten. Today I will explain two ways to clean your yellow soles with baking soda (majorly).

These which you will need here while cleaning your yellow soles are actually in your kitchen and you can find it easily in supermarkets if it is not available in present. From these basic components you can clean your yellow soles with baking soda

Here the basic component will be baking soda and some other things that I will discuss below.so first take your mom’s permission before entering her kitchen….haaa

So let us move on to our very first method.

FIRST METHOD: TO CLEAN YELLOW SOLES

Table of Contents

Ingredients required:
Baking soda, laundry detergent, toothpaste, used toothbrush

STEP-1

First, take the baking soda in a container and thereafter add laundry detergent in 1:2 proportion. The ratio of detergent and baking soda should be right for better results. Mix them until it forms a loose and fine paste.

STEP-2

Got the mixture of soda and detergent with the directed proportions, then add toothpaste to it and mix it well. Now your mixture is ready for cleaning your soles.

Note: This same process can be done for your shoes also.

STEP-3

Now you have the final mixture or paste that will make your sole and shoes again whiter.

Before applying take up the soles and just clear the dust if required and now use the toothbrush and apply the mixture on the soles.

STEP-4

The final step, allow the mixture to dry and once the mixture put on it is dried, wash it off.

Now give some time to dry up the soles, and your yellow soles will be whitened.

You can also refer to this video,this is applicable for both shoes and soles

SECOND METHOD: TO CLEAN YELLOW SOLES

Ingredients required:
Hydrogen peroxide(H2O2), baking soda and warm water

If you are not aware of using hydrogen peroxide so do check out this video first!

STEP-1

First of all, make a fine paste of hydrogen peroxide(h2o2) and baking soda

You can get hydrogen peroxide in your near medical stores.

STEP-2

Apply the paste on the soles and try to put more quantity o the most affected areas.

Step-3

Cover the soles with plastic so that the mixture won’t get dried.

STEP-4

Now put the soles in the warm water for 30 minutes and wash it with a brush. Your sparkling white soles are here.

How to clean mesh shoes

  • Versatile, effective and affordable solution for over 170 years
  • Use for baking, cleaning, deodorizing and more.Baking Soda can be.
  • Free of harsh chemicals and gentle enough to use on many surfaces
  • Hundreds of uses like: fresh box for baking

How to clean mesh shoes

  • For Baking, Cleaning, and Deodorizing
  • Free of harsh chemicals and gentle enough to use on many surfaces
  • America’s no 1 trusted baking soda brand

Last update on 2022-09-15 / Affiliate links / Images from Amazon Product Advertising API

Why we use H2O2 for cleaning our soles?

Hydrogen peroxide is a non-chlorine bleach and by mixing it with baking soda the dirt are converted into bubbles and It further cleans the surface of the sole.

After long or even shorter use, your sneakers get dirt. Therefore, knowing how to clean New Balance shoes or other brands sneakers,В Allen Edmonds shoesNike shoes, for instance, is important. It will save you money as well as make them a new look.

There are tons of ways to clean your shoes that you can apply by yourself at home. However, depending on the materials used to make your sneakers you need to take steps to wash it.

Luckily, some shoes come with suggested cleaning procedures with each pair, yet fewer aren’t. that is why we are going to tell you today how to wash your new balance shoes;

How To Clean New Balance Shoes – Step By Step Guideline

While stepping on to wash your running shoes, you need to determine first the way that should follow to do the job done. And, it solely depends on the resources that your sneakers are made of.

Whatever it is, this step by step guide going to helps you massively to wash your New Balance workout shoes, New Balance leather shoes, orВ New Balance running sneakers.

Step #1

Hand Wash

This is the easiest way to make your sneakers brand new like ever before. And most of the sneakers come with hand cleaning options that you can apply at home with just a few items.

A gentle amount of laundry detergent powder or dishwashing soap with a medium-size bowl and a soft brush you need to do the job. Eventually, after completing the first step, you need a clean dry cloth to finalize the work.

Paper towels instead of clean cloth and baking soda can be used additionally for better treatment. When all the materials in your hand, then start working as below, however, remember this is not applicable for suede shoes.

  • Make a good balance solution with the right amount of laundry detergent and water- slightly warm water may be good, but not necessary. Instead of laundry detergent dishwashing soap could be a good option.
  • It is good to remove all the loose dirt from your sneaker before you let them clean with a washing solution.
  • Detach lace from shoes also remove insole – if it is removable.
  • Use a soft brush to scrub the solution onto your sneakers.
  • If there is any type of stains that made of oil or something like oily materials, good idea to use a soft shampoo.
  • Make sure there is not any dirt, especially in the lace hole or any other conner place inside the shoes.
  • While you are satisfied and sure that there is not a speck of single dirt inside the sneaker, put them for dry.
  • Cover them fully by the clean dry cloth or a paper towel for a while. You can also use aВ Revlon One-Step Hair DryerВ for a quick result, however not important if you are not busy.

The above-mentioned washing steps are typically good for all types of canvas shoes however, it is highly recommended to see the care label of the sneaker that might help you do the thing more precisely.

Step #2

Machine Wash

This is also a good response to how to clean New Balance shoes, yet claims a bit more careful. Not all the shoes are over up to throw into the washing machine for cleaning purposes.

This is it is great to see the care label first. Luckily, most of the canvas sneakers are eligible to take a tour into the washing machine to make them brand new.

Just see there is not any suede or leather or metal materials that might harm the washing machine. Moreover, it may cause an accidental case if come with electric contact. Otherwise, just put them inside the machine like other muted clothes.

Apart from this, few non-canvas shoes can be clean in a washing machine, however following the guidelines by the manufacturer that typically attached to the shoes.

  • Remove the insole and lace before it goes into the washing machine.
  • Remove all the loose dirt so that the cleaning process could a bit easier.
  • Put your sneakers into a net bag or a fabric pillow cover and make it tighten that can’t get out inside the machine.
  • Better to put a few clothes with laundry detergent with your sneakers.
  • Use cold water in the event of color shoes, otherwise warm water with pay you back the better result.
  • A good quality vinegar, for instance, 30% Pure VinegarВor hydrogen peroxide that will help to clean your shoes more appropriately. Relatively, it helps to remove the smells.
  • For your better convenient Hydrogen Peroxide, Topical Solution 32 OZВcould be the best choice in the event of selecting hydrogen peroxide.

Please keep in mind if you have embroidered your sneakers or canvas shoes with any types of colors, shade, paints, or any other streamers, it is better to don’t let them go throw the washing machine for clean.

After having a good journey into the washing machine, let them for a dry properly. Again a dryer could be the best option to do the job rightly and rapidly. Never let your sneakers under the burning sun for dry.

Frequently Asked Questions

Why Do New Balance Shoes Stink?

Anybody who goes on walking or running sneakers is going to sweat in them. Typically a robust foot scent is a hereditary attribute.

However, an aroma in sneakers could specify the occurrence of yeast or microorganisms. Sparkling stinking New Balance shoes to evade bottom and toenail contaminations.

How Do I Fix My White Shoes From Turning Yellow?

Though yellow peroxide dyes can be problematic to get out entirely, you can eliminate or importantly reduce the entrance of the dyes by using brackish and warm water scrub.

Drenched your sneakers in the ointment of deposit resolution. Or, by coating your sneakers with clean washing cleanser and greying vinegar.

How to clean mesh shoes

Any type of glue is useful in minor fixes or detailed repairs and removing adhesives can be a simple task. Even with great care, glue can leave behind unappealing stains on your clothes, work areas, tools, surfaces and even on your shoes. Learning ways on how to remove glue stains from shoes and other surfaces is vital in maintaining their overall appearance.

Table of Contents

What are the common methods in removing adhesives?

There are various techniques on how to remove glue stains from shoes and other surfaces. Generally, the removal methods are categorized into mechanical, chemical or thermal.

  • Mechanical. When you end up with a glue stain on your favorite shoes, it can be dealt with by using some old-fashioned apparatuses – a scraping tool and your hands. Pan or paint scrapers as well as razor blades work well since they utilize defined edges to remove any leftover glue. Make sure that you will use it gently to avoid scratching or damaging the material of your shoes.
  • Chemical. For the chemical approach, you can apply a solvent to break down the adhesive so that you can easily wipe the residue away. If this approach is used, you must consider the surface material and degree of penetration needed. Some of these products include your regular cooking oil or other oil-based materials as well as rubbing alcohol or vodka. Just remember that certain adhesive removal products are formulated differently so you should carefully read the instructions and test it first before applying on your shoes.
  • Thermal. You can utilize heat to weaken adhesives such as from a hairdryer. Other methods might not be suitable to be used in shoes.

How to remove glue stains from shoes made of leather or fabric

Whether you have leather or fabric shoes, there are methods that you can use to effectively remove glue stains.

When removing glue from leather or similar materials such as suede, it requires a light hand. Start by scraping the glue carefully using a dull edge to remove it without damaging the material. Apply warm soapy water using a sponge, making sure that the glue is soaked with the suds. Wipe with a dry, clean cloth and repeat as needed.

In case the glue seems to linger, you can use the acetone method. Simply dab a cotton ball soaked in acetone-based nail polish remover on the glue stain. Allow it to permeate and loosen the glue and wipe it away with a cloth.

For fabric shoes, start by scraping off as much glue as possible. Use a light hand to avoid stretching or tearing the fabric. Soak the shoes overnight in cold water.

After soaking, dab on a small amount of liquid laundry detergent and massage it with a soft-bristled brush. Wash normally in warm water.

If the glue is difficult to remove, you can try applying acetone on a cotton ball and apply it on the glue stain. Just be careful with some fabrics since acetone can cause discoloration. Wash using a warm cycle.

Does vinegar remove glue residue?

Glue and other types of adhesives can cause materials to attach together by creating solid molecular bonds. If you want to remove glue stains, you have to disrupt the adhesive bonds that secure them together. Depending on the type and strength of the adhesive, vinegar can be used to safely remove glue residue from various materials.

If you are going to use vinegar, soak a cloth or paper towel and rub it over the adhesive. Leave in place for a few minutes on the glue stain. After a while, remove and scrape the residue away.

How do you remove super glue without acetone?

Superglue (cyanoacrylate) is a quick-dry adhesive known to stick almost anything in just seconds. Luckily, there are techniques to remove superglue without using acetone or if you do not have one.

Some of the cleaning methods involve the use of warm water, mild soap, mineral spirits, salt, and even laundry detergent. Remember though that the effectiveness depends on the type of material with the glue stain.

Does hand sanitizer remove super glue?

Removing superglue from shoes made out of fabric requires care to avoid damage. You can utilize commercial stain remover products by soaking the site of the glue stain, allowing it to sit and washing on a gentle cycle.

If the glue stain lingers, perform spot cleaning by applying detergent directly on the residue. For deep cleaning, you can use ammonia thinned in hot water or an alcohol-based hand sanitizer. Do not forget to test initially on the fabric to avoid any damage.

Does vinegar remove super glue from plastic

If you have gotten super glue on plastic a solution on how to remove the super glue is vinegar. White vinegar will free the glue; let the plastic object soak in vinegar for 2-3 hours and the glue will most likely be off, or easy to remove.

Let’s wrap it up

Glue stains on shoes can be unappealing to look at. You do not want to wear a pair with several glue stains on. When it comes to methods on how to remove glue stains from shoes, there are several effective methods that you can try to eliminate the stains left behind by adhesives.

Proper care and attention is required to maintain and prolong the look, performance, feel and comfort of golf shoes. Faced with a wide range of hazards, both leather and synthetic golf shoes must be thoroughly cleaned and properly stored between rounds in order to prolong the look and life of the shoes.

  • We recommend rotating shoes between rounds – properly maintained the rotation of two pairs of shoes will last much longer than twice the life of a single pair.
  • Use a shoe horn when putting on your golf shoes to protect the heel counter of the shoe.
  • Check your cleats between rounds to ensure they are intact and secured properly into their respective receptacles, but DO NOT OVER TIGHTEN your cleats.
  • Do not store your golf shoes in your car trunk, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.
  • We strongly recommend leaving Cedar shoe trees in your golfing shoes at all times when shoes are not in use.

Cleaning Guidelines

  1. Pre-Round Shoe Care
  2. Post-Round Shoe Cleaning & Care
  3. Cleaning Mesh Shoes
  4. Cleaning Men’s HyperFlex
  5. Cleaning Women’s emPower

Pre-Round Shoe Care

Use a shoe horn when putting on your golf shoes. This will protect the heel counter of the shoe. Damage to the heel counter can cause improper fit in the heel which can lead to blistering and overall discomfort.

Post-Round Shoe Cleaning & Care

Uppers

Clean leather or synthetic golfing shoes after each round by removing dirt and residue using a shoe cleaner or mild soap and water. Allow to air dry at room temperature.

White Shoes: To clean shoes with a white base leather, apply white shoe cleaner to remove unwanted scuff marks. This will also condition the leather.

Dark Shoes: To clean shoes with a dark base leather use a combination of a shoe cleaner and an applicable color shoe creme to maintain the look and conditioning of the full grain or calfskin leather.

Wet Shoes: If your shoes become soaked during a round,

  1. Clean them quickly.
  2. Place crumpled newspaper inside for 8-10 hours to soak up all excess water.
  3. Remove newspaper and replace with FootJoy Cedar Shoe Trees. Cedar shoe trees will bring the uppers back to normal shape, smooth the linings and absorb any remaining water and odor. The absorption properties of cedar make them far more effective than plastic shoe trees.
  • Remove the laces when cleaning.
  • If not glued into the shoe, remove the inner sole when cleaning your golf shoes.
  • Do not place your shoes in direct sunlight to dry, but rather allow them to air-dry in a shaded area or indoors.
  • NEVER dry your shoes using a blow-dryer or by putting them on any external heat source. Excessive heat can damage both the uppers and the outsoles.

Outsole Care

All non-leather outsoles should be wiped clean of dirt and residue after every round.

Check to ensure that all cleats are intact and secured properly into their respective receptacles.DO NOT OVER-TIGHTEN THE CLEATS.

Do not store your golf shoes in your car trunk, where high temperatures can break down shoe materials resulting in decreased lifespan of your shoes.

Cleaning Mesh Shoes

Hand Cleaning Mesh Shoes

  1. Soak in the sink with a squirt of liquid dish soap or laundry detergent and warm water.
  2. Dip a soft cloth or soft-bristled cleaning brush in the soapy water. Scrub the mesh to remove dirt, dust and residue.
  3. Blot or dab at the mesh with a cold water dampened cloth to remove soap residue.
  4. Allow the golf shoes to air dry. Do not place the shoes directly in the sun, but rather allow them to air-dry in a shaded area or indoors.

Machine Cleaning Mesh Shoes

  1. Remove the shoelaces. Also, if they aren’t glued into place, remove the inner soles.
  2. Wipe the mesh lightly with a clean cloth, using soap and warm water (not hot).
  3. Scrub tougher stains with an old toothbrush and a gentle laundry detergent.
  4. For a final clean on mesh shoes (to help tackle persistent stains), put the mesh golf shoes and laces in a mesh washing bag, and place in the washing machine. Wash on a gentle or delicate cycle.
  5. Allow them to air-dry. You can add newspaper initially to absorb moisture for 30 – 40 minutes. Remove the wet newspaper and add shoe trees when still damp to maintain their shape.

Cleaning Men’s HyperFlex

Here is a video to demonstrate the best way to clean your HyperFlex men’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of golf shoes are cleaned, remove the Fit-Bed® insole and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the Fit-Bed® insoles.

Cleaning Women’s emPower

Here is a video to demonstrate the best way to clean your emPower women’s golf shoes. Or simply follow the instructions below.

Step 1: Ensure your shoes are completely dry and that the shoe laces have been removed. Starting with a dry shoe surface helps to easily remove mud and dirt.

Step 2: Use a dry brush (with firm bristles) to gently brush off any dirt from your pair of shoes.

Step 3: Next, wipe off any excess debris from your pair of shoes to ensure all small dirt particles are completely removed.

Step 4: Add a tablespoon of cleaning solution to a bowl of room temperature water. Next, dip a clean brush (with soft bristles) into the bowl.

Step 5: Gently scrub shoes until solution starts to bubble.

Step 6: Wipe off excess solution with a towel.

Step 7: Once your pair of shoes are cleaned, remove the Fit-Bed® insoles and place both shoe laces in the bowl of water and cleaning solution. Remove from solution after 10-15 minutes and allow to air dry — or blow dry for faster results.

Step 8: Allow both your shoes and shoe laces to completely dry before re-lacing and inserting the Fit-Bed® insoles.

Need Help?

Our Customer Service Team
is ready to help.

Are your Hoka shoes in desperate need of a good cleaning, but you are scared you may ruin them if you give them a good wash?

Not to worry, this article will take you through the process of successfully washing a pair of Hokas.

To wash a pair of Hoka shoes, you will need a non-abrasive cleaning agent, a soft bristle brush, and water. After wiping all loose mud, dirt, and debris from the shoe, remove the laces, insoles, and liners, throw them in the washer, then scrub your shoes.

Cleaning off Hoka sneakers is a lot easier than cleaning many other pairs of high-quality shoes. Here is exactly what you need to do in order to have your sneakers looking good as new.

Materials That You Will Need

  • A non-abrasive cleaning agent (Dye-free shampoo or dish soap works best)
  • A soft bristle toothbrush
  • A bowl of water
  • A washcloth or towel

Hoka Shoes Washing Instructions

It shouldn’t take long at all to get your Hoka’s look as good as the day you bought them. It is important to remember that you can not put your shoes in the washing machine, and using the washer and dryer can damage or age your sneakers.

The best way to clean these shoes is with products you can find around your home.

Step 1 – Wipe off Debris

Before you can scrub your sneakers clean, you first have to wipe the caked mud and dirt off of the shoe. You can do this easily by wiping it off with paper towels or a washcloth until all access dirt is gone.

Please enable JavaScript

It’s also important to clean the insoles inside your shoes or boots. Simply take a scrub brush or cloth and cold water and spend a few minutes on this cleaning process.

Step 2 – Scrub the Shoes With the Solution

Mix a few drops of your cleaning agent into a bowl of water and use the toothbrush to scrub all of the remaining dirty areas until there is a thick lather and the outside and inside of the shoe look clean.

Mild soap and warm water can also be used if you want to keep it simple while scrubbing away all debris.

Step 3 – Remove Excess Residue

Once the shoe is clean and free of dirt or mess, use a dry washcloth to remove any excess dirt and water.

Step 4 – Air Dry Your Hoka Shoes Overnight

The safest way to dry a pair of Hoka shoes is by keeping them out for a few hours indoors, allowing them to dry on their own. A clothes dryer or blow dryer can soften and warp the materials. You can also stuff newspaper balls inside the shoes to aid in faster drying.

Can you Machine Wash Your Hoka Shoes?

You should never put your Hoka shoes into a washing machine or dryer; this can warp the materials making the sneaker age faster and start to fall apart.

You can, however, throw the shoelaces, insoles, and liners into the washing machine to keep them looking great and smelling fresh.

How to Help Your Hoka Shoes Last Longer

If you are worried your Hoka sneakers are not going to be able to hold up to the weather and environment your shoes are subjected to, here are a few ways to help them last.

  • Water-proof sprays
  • Odor sprays or baking soda
  • Loosen the tongue and laces after use and set them in a dry area soles down
  • Never run in wet shoes (whether wet from a previous run or a recent cleaning)

Keeping your shoes well-cared for is the best way to maintain the life span and have a great pair of shoes for a very long time.

Final Thoughts on Cleaning Hoka Shoes

Cleaning a pair of Hoka shoes couldn’t be any easier or straightforward. As long as you follow the directions and wash them carefully, you will never have to worry about walking in a dirty pair of shoes ever again.

Recent Posts

report this ad Amazon Associates Program

HikingSoul.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. report this ad

HikingSoul is a team of adventurers who hope to share with you their experiences and love of the outdoors!

How to clean mesh shoesHow to clean mesh shoes

Give your footwear collection a makeover by learning how to clean shoes at home.

No matter where you are or where you go, you can always spot an array of footwear on display- and their lack of upkeep. Why is it that you are not willing to wear unwashed or creased outfits but are okay with wearing unclean shoes? This fashion faux pas is committed by most of us because we are unaware of how to clean shoes at home.

Different textures and looks often discourage us to experiment too much with cleaning products. So we at HerStyleAsia are making this easy for you.

We will show you how to clean your shoes at home, no matter what texture or style you own. Use these simple hacks to keep your shoe closet squeaky clean.

How To Clean Shoes At Home

#1 Leather shoes

Prepare a solution of equal parts of water and white vinegar and use it to clean any debris over your leather shoes. Let them dry on their own and rub a soft cloth over them.

If the issue is scuffs, then you buff them away with a wet cloth that is dipped in baking soda. Wipe your shoes again, let them dry and buff them one last time.

#2 Patent leather shoes

If your patent leather heels or flats have scars or marks on them, you can rub some petroleum jelly over them using a cotton swab.

How to clean mesh shoes

Image courtesy: Instagram

If however, you want to add more shine to them, you can use lens cleaners and spritz a little on them and buff with a soft cloth.

#3 Suede shoes

Suede shoes tend to get stained very easily. So first remove any dust on them by gently scrubbing a soft toothbrush or nail brush in one direction. Once the dirt if oss, use the same brush and scrub the brush again over the stain, onle this time use more pressure.

If needed, use an eraser to scrub away stubborn stains.

For really stubborn stains, use a white washcloth to rub some white vinegar or rubbing alcohol over the spot. This will also brighten the hue of your suede shoes.

#4 Sheepskin boots

First, wipe off any dirt or debris using a toothbrush or a nail brush. Now use an eraser, preferably white, to rub off stains or marks on the boots. If there are still some more left, you can use a damp cloth to gently wipe of the stains. Make sure the cloth is too wet, or else it will destroy the material.

How to clean mesh shoes

Image courtesy: Pixabay

For excessively stubborn spots, you can use a solution of cold water and white vinegar. Using a soft cloth, wipe the solution off the boot and let them dry naturally. Make sure to insert some newspaper inside the shoe so it maintains its shape.

#5 Canvas shoes

Wipe of dirt or debris from your canvas shoe using a toothbrush. Now prepare a mixture of equal parts of baking soda and water and rub it on the soles of the shoe using the toothbrush.

Next, start your washing machine with about half the amount of detergent you would normally use. Once the machine is three-fourth filled with a mixture of water and detergent, toss your shoes in, tumble and let them air dry.

#6 Running shoes

Get the dirt and debris off the shoe using a toothbrush. Once it ready, soak it in a solution of a tablespoon of detergent and two cups of water. You can use this solution to clean the mesh, the fabric, the soles, the rubber areas but not the foam or leather.

Once clean, use a sponge to clean of any stains or remaining dirt. You can also throw them in with your laundry, albeit in a laundry bag, along with your delicate clothes. Air dry and and wipe them with a soft cloth before you restring them.

#7 White sneakers

Use a cotton swab and dab some nail polish remover or white vinegar on it and use it to remove any stains on your white sneakers.

How to clean mesh shoes

Image courtesy: Pixabay

If you think the colour is slightly off, you can bleach your shoes. But make you dilute the bleach well, so your shoes don’t end up discoloured. So you can use one part bleach and five parts of water and rub this solution with a toothbrush. Finish off by rinsing your shoes in warm water.

#8 Cork and rope wedges

If you have cord wedges, you can prepare a solution of four litres of warm water, half a cup of white vinegar and one tablespoon of liquid soap. Wipe your entire show with this solution and then dip your soft cloth back into it and concentrate on the cork using circular motion. Once done, clean the shoes with a dry cloth and air dry.

Classic, go-with-every-look white sneakers are wardrobe staples in practically every shoe lover’s closet. If you’re like us, you probably have more than a few pairs. And chances are, they’ve probably seen brighter, whiter days. We’re talking scuff marks, sole streaks, discoloring, grimy laces (that are also kinda crunchy)—you know how it goes. But it doesn’t mean your white kicks are ruined for good.

For some serious sneaker-maintenance schooling, we reached out to Johnny Fajardo, sneaker whiz over at innovative shoe-care company Sneaker LAB, to share some of his best insider tricks for cleaning white sneakers. The man personally sets aside an hour out of his weekend to tend to his shoe collection, so you know he knows what’s up. “It’s actually quite a relaxing experience—it’s my only time to de-stress, clear my mind, and disconnect from my phone, emails, and electronics,” he laughs.

His top pointers, below.

Protect Right Outta the Box
The key to keeping white kicks looking brand new, Fajardo says, is to apply a sneaker protector as soon as you unbox them. “The spray forms an invisible layer that protects them from dirt, stains, and liquids,” he says. Sneaker LAB makes a great one, but generally the rule is to look for a protector that repels liquids and is safe for your shoes’ material. Adds Fajardo: “And remember to reapply every other week.”

Store Them Properly
Any sneakerhead worth his or her salt stores off-duty kicks in shoe bags or boxes. “You may not notice it, but there’s microscopic dust and dirt floating around everywhere, especially in enclosed spaces like closets,” says Fajardo. “Over time, shoe materials—especially knit, suede, and mesh—collect these dust particles, which eventually affect the overall look of your sneakers.”

Pick Up a Water-Based Cleaner.
They’re less harsh on fabrics than chemical-based cleaners, explains Fajardo, and they’re safe to use on all materials, including mesh and leather. Combined with lukewarm water, an all-purpose water-based cleaner should eliminate most stains.

. Or, In a Pinch, Use This Formula
A dab of baking soda, toothpaste, lukewarm water, and a toothbrush. “While I wouldn’t recommend it for regular sneaker upkeep, it’ll work if you’re in a bind,” says Fajardo.

Brush, Don’t Scrub
Common misconception: The harder you brush your shoes, the cleaner they’ll get. According to Fajardo, brushing too hard may loosen fabrics and give your sneakers that worn-out look (especially true for knit, mesh, and canvas shoes.) Get a medium-bristle shoe brush or an old toothbrush and brush with light, soft, rapid strokes. It doesn’t damage fabric and helps work cleaning solutions deeper into the sneaker.

Deep Clean On the Regular
“It’s important to consistently tend to your sneakers with deep cleanings,” says Fajardo. “This ensures that dirt and stains don’t build up, which can make cleanings far more difficult. Assuming you’re wearing your white kicks three-to-four times a week, I suggest a deep cleaning every two weeks.”

“Enjoy your sneakers, wear them without fear of scuffs, and have confidence that nearly any stain is treatable.”

  • Johnny Fajardo, Sneaker LAB

Breaking it Down Even Further

Exactly how to clean common sneaker types from canvas to leather (plus soles and laces).

White Mesh Shoes
Since mesh is so delicate, avoid using bleach which can ruin the fabric. Instead, this is a job for a sneaker cleaner or a bit of mild dish soap cut with warm water. Gently brush the cleaner all over your dirty sneakers. Rinse your shoes under cold water when you’re done. If there’s still discoloring, try spraying the spot with white vinegar before letting it dry in the sun for about an hour.

White Running Sneaks
First, get rid of any dirt, mud, or gunk with a shoe brush or old toothbrush. Then, using a sponge, cloth, or brush, apply a small amount of sneaker cleaner (or gentle laundry detergent mixed with warm water) to the dirty parts. With tough stains, keep repeating until they’re gone.

White Canvas Kicks
Everyone’s got a pair of beat-up Chuck Taylors, right? Good thing they’re made of a cotton-canvas that’s super easy to clean. Just brush it with sneaker cleaner that’s mixed with lukewarm water and leave them out to dry. (They’ll look darker at first but give them an hour or so and they’ll look white as new.) Or, you can create a homemade cleaning paste with baking soda and an equal amount of half water and half hydrogen peroxide. Apply the mixture all over your shoes with a brush and let them sit for four hours. The mixture will have hardened and you can just shake off the hard bits and wipe off any remainder with a soft cloth or paper towel.

White Leather Sneakers
This is your opportunity to try that nifty toothpaste trick mentioned above. All you need is a toothbrush, some white toothpaste and warm water. Gently scrub away any stains and dirty spots. And yes, this seriously works. Trust.

White Soles
To deal with scuff marks and any streaks of dirt or mud on white soles, swipe with sneaker wipes or a wet Magic Eraser. And for any specks of dirt and splotches that just won’t go away, try white nail polish as a little beauty touch-up.

White Shoelaces
And last but not least: the laces. Pull them out of your sneakers, then hand wash them in warm soapy water (gentle dish soap works great) letting them soak for a few hours before air drying. If your laces are extra grimy, trying covering them with the same cleaning paste we mentioned above for canvas shoes and let dry for a few hours in the sun. Then shake and wipe off the hardened bits.

Share This Story

Comment bubble icon

All performance footwear will start to smell eventually, regardless of anti-microbial materials used or how many mesh layers have been stacked to create your sneaker of choice. Unless you’re a pro athlete who goes through a fresh pair every game, you’ll need the following tips for how to keep your shoe game tight. Don’t be the smelliest guy on the bus and click through for 10 simple and cheap ways to keep your sneakers looking and smelling their best.

No. 10 – Sneaker Balls

Remember these? Your Mom stuck these in your gym bag back in the day for good reason. These mini deodorizers are strong enough to help out shoes when in transit or in a cramped gym locker.

No. 9 – Spray ‘Em Down

If you have any essential oils (lavender, tee tree, lemon, rosemary, peppermint) put them to use. Chances are you probably don’t, but combining an essential oil with vodka and distilled water can eat up odors between uses. Another fix-it-all you may already own is white vinegar. For desperate cases, soak your shoes in a sink of water and white vinegar to clean out the bacteria that is causing that stench.

No. 8 – Store Shoes with a Cedar Block

That old cedar trick where you keep a block of wood in your underwear drawer to keep moths away can combat odor as well. Cheaper than Sports Balls and a little more grown-up looking. Classy, bruh.

No. 7 – Mr. Clean

We’ve said it before, Mr. Clean does the trick. While the Magic Eraser may not be able to banish bad smells, the sponge takes away any scruff marks or dirt stains that make you feel less than shiny out on the field.

No. 6 – Clean Immediately After Using

The long the bacteria sits in the fibers, the smellier your shoes will get. Same goes for stains and scruff marks, the sooner you buff abrasions out the easier it will be. Keep a sponge in your gym bag makes it easy to wipe down cleats before they go back into your bag.

No. 5 – Let Them Breathe

Stacking up shoes might make your room look neater, but no amount of Frebreeze will help that situation out. Store sneakers and cleats in an open air environment to let them breathe before their next big game.

No. 4 – Don’t Overthink It, Throw Them in the Washing Machine

While most footwear brands advise against the washing machine for a throughout hand washing, sometime a spin in a sudsy whirlpool is all a shoe needs. Remove laces and insoles and add a neutral detergent, wash with bulky items like sheets or towels for a gentler option.

No. 3 – Pull Out the Tongues

This seems simple, but if you’re putting mean miles on your shoes be sure to unlaces and pull open uppers as much as possible after use. This extra air flow will let your sneakers breathe and keep odors from being trapped.

No. 2 – Spray Them Down, Part II

If you don’t have the time or the motivation to use any of the other advise, grab the garden hose. Rise them well and leave them in indirect sunlight to give them a fresh start.

No. 1 – Baking Soda

The most useful advice you will get from this list is knowing the power of baking soda. Sprinkle baking soda into your runners, basketball shoes, cleats, or trainers post workout to deodorize sweaty shoes and keep you smelling clean. If your shoes have any mesh layers be sure to shake powder loose before wearing again to avoid puffs of white clouds with each step.

Cleaning your muddy on cloud shoes is not as difficult as you think. This article has an ultimate guide you can follow while cleaning your on cloud shoes. Wash your shoes by hand or place them in the washing machine on a cold cycle

How to clean on cloud shoes by hand

  1. Wait for the mud to dry.
  2. Beat your shoes together or Scrub the dry mud off the shoes with a dry toothbrush.
  3. Remove your shoe’s laces and stuff it with a cloth.
  4. Mix equal parts of baking soda and liquid washing detergent in a bowl.
  5. Dip a toothbrush in the cleaning solution and scrub it over the soles and heel.
  6. Scrub the surface of your shoes with a soft cloth and the cleaning solution
  7. Rinse with warm water.
  8. Stuff your shoes with newspaper. This helps them maintain shape and decreases drying time.

Can I put my on cloud shoes in the washing machine?

You can, but before you do, there are a few things you need to be aware of:

  • Tip#1: Take off the laces.
    To keep your laces from getting tangled, remove them and put in a separate bag or pillowcase to go into the washer.
  • Tip#2: Add towels.
    It’s important to balance the load while washing so your shoes don’t bang against each other or get tangled up in something. Put 4-6 old towels under them before starting, and put your on cloud shoes into a mesh laundry bag for extra protection!.
  • Tip#3: Choose the best washing machine setting.
    When washing your shoes, use liquid detergent and cold water. If possible try to find a cycle with low spin speeds so that the washer stays balanced while you work away at those stains!

How to clean on cloud shoes in washing machine

  1. Remove any surface debris with a damp rag.
  2. Clean the soles of the shoes with a toothbrush and warm soapy water.
  3. Place your laces and insoles into a delicate bag.
  4. Stuff your shoes into a pillowcase and twist the end.
  5. Set washer on a delicate cycle using only cold water.
  6. Use a gentle detergent and avoid using fabric conditioners.
  7. Pad out the drum with a couple of towels to help cushion your shoes during the spin cycle.
  8. Scrunch up newspaper and place it inside your clean wet shoes.
  9. Leave your shoes to dry for 12 hours before you remove the newspaper.

The best way to dry your wet on cloud shoes fast

The old method of stuffing them with newspaper is still the best method.

  • Cheapest.
  • Safest. Doesn’t damage your shoes like putting them in the dryer.
  • Efficient. You probably have a newspaper or paper towels laying around. Stuff it in your shoes and a few hours later compost the paper.

When you’re done with your paper, it’s important to place them somewhere that has good ventilation and plenty of natural light. If possible try not to store in a dark area because this can cause mold or fungus growth on the coating which will ruin its color over time!

The best way to keeping Your on cloud shoe Fresh

Baking soda is by far the cheapest way to treat smelly shoes. This can help to absorb bad smells and leave your shoes much fresher.

  1. Sprinkle ordinary household baking soda directly into your shoes.
  2. Shake the shoe to distribute the baking soda across the insole.
  3. Let the Shoes Sit For at Least 24 Hours
  4. Dump the baking soda out.
  5. Store your shoes with a cedar block.

Our shoes take us to many places. And usually, we find ourselves stepping in hotbeds of dirt, mud, and grime. As we walk, the soles of our shoes constantly pick up dirt and germs, making them the common breeding grounds for bacteria.

Getting our shoes dirty is inevitable, but there are ways to clean them to make them look as good as new and, not to mention, avoid getting disease-causing bacteria.

While black rubber soles are easy to clean with just soap and water, cleaning white rubber soles is a little different.

Dirt, dust, and grime can build up fast on white rubber soles, which, if not treated right away, can cause discoloration.

The good news is it is possible to keep your white rubber soles looking as fresh as the day you bought them. Check out these tips from Famous Footwear on how to clean rubber soles on your shoes below:

Using Soap and Water

Step 1: Remove caked-on dirt on the soles. Bring your shoes outside and slap the soles of your shoes together to remove caked-on dirt or mud.

How to clean mesh shoes

Step 2: Using a dry brush or a toothbrush, remove any loose dirt. Do not use steel brushes as they can damage the rubber soles.

Scrub the soles properly. Get in the grooves as well as the edges to remove as much dirt as possible.

How to clean mesh shoes

Step 3: Fill a plastic pan or basin with warm water and add a small amount of dish soap. Stir the water until the dish soap is mixed in. Use just enough water to cover the soles of your shoes.

Step 4: Soak your shoes in the soapy water. Dip only the soles and make sure the solution does not reach the upper of your shoes. Leave it for about 20 minutes.

How to clean mesh shoes

Step 5: Scrub the wet rubber soles with a toothbrush to remove any remaining dirt.

How to clean mesh shoes

Step 6: Wipe the soles with a cloth to dry them.

How to clean mesh shoes

Using Baking Soda and Laundry Detergent

Step 1: Similar to the first step above, you have to remove large bits of mud or dirt first by smacking your shoes together.

Step 2: Remove any loose dirt using an old toothbrush. You don’t need to remove the dirt completely with the brush because it will loosen once you use the cleaning solution

Step 3: Set your shoes aside and start making the cleaning solution. Mix a tablespoon of baking soda with an equal amount of laundry detergent in a small bowl or cup until it forms a paste.

Do not use laundry detergents with a bleaching agent as it could damage your shoes.

Step 4: Apply the paste on the soles of your shoes using a toothbrush. Scrub it in a circular motion and avoid touching the fabric of your shoes.

Step 5: Use a wet cloth to wipe away the solution along with the rubber of your shoes. Make sure to completely rinse off the solution.

Step 6: Dry the rubber soles with a clean cloth.

Using Nail Polish Remover

In case you notice scuff marks on your rubber soles, you can use a nail polish remover. Just as you would remove your nail polish, you can use it to get rid of scuff marks and dirt on your white rubber soles.

Step 1: Remove any dirt from your shoes first using either of the two methods above. After cleaning your shoes, you can now start with the nail polish remover method to remove scuffs.

Step 2: Soak a cotton ball in a nail polish remover. You might need to use more than one cotton ball depending on the dirt or scuff marks on your shoes.

Step 3: Scrub away the scuff marks with the soaked cotton balls.

Step 4: After removing the scuffs from the soles, you may want to clean the rest of the rubber sole with the soaked cotton ball.

Do not use nail polish remover on the fabric of your shoes as it could cause discoloring.

DO YOU LOVE SHOES? Win free shoes, organize your shoe closet, see the latest styles + more

How to clean mesh shoes

A look from Marc Jacobs Spring 2018 collection. Photo: Imaxtree

“Basic” may have adapted a negative connotation in recent years, but there’s no shame in seeking advice on theoretically simple sartorial conundrums. In our latest column, “Back to Basics,” we’re here to guide you through life’s most common (and important) fashion and beauty concerns.

From Chanel’s instant-hit booties to Tom Ford’s sparkling knickers, 2017 proved to be a glitter-filled, high-shine year. Designers, celebrities, street style stars and Fashionista editors alike were especially attracted to the small bits of sparkly confetti, having worn the party-girl staple all throughout fashion month and all over the red carpet.

Perhaps the more recent championing of glitter-coated anything stems from society’s need to add a little pizzazz to a dark couple of months, or maybe it’s simply that the fashion set wants to recreate the shamelessly glam disco era. Either way, it has us randomly lusting over sparkly items that we thought only our five-year-old selves would want.

But when you finally decide to make a glittery purchase, you are confronted with the not-so-glamorous reality of having to clean and maintain its shine: If I were to invest in a pair of $10,000 Saint Laurent glitter boots, you better believe that I’m not about to lose one single speck of that glitter. But that’s easier said than done. With that in mind, we put together a quick masterclass on how to care for glitter.

Related Articles

Back to Basics: How To Clean Sequins, Fur and Feathers

Glitter Boots Were The Single Breakout Shoe Trend of Fall 2017 Fashion Month

You’re Going To Want To Stock Up on Sequins For Spring 2018

Use hairspray to minimize your glitter losses

To maximize the high-shine life of your glittery goods, use a strong-hold aerosol hairspray every time you wear or wash the article. Typically, the sparkly bits of plastic are glued to the fabric’s surface, and the hairspray acts as a glitter-holder by creating a protective layer that reduces the flaking glitter pieces.

Recommended Articles

How to clean mesh shoes

Massimo Bonini Is Hiring A Showroom + Coordinator In New York, NY

How to clean mesh shoes

79 Memorable Beauty Looks From New York Fashion Week

How to clean mesh shoes

Serena Williams, Anne Hathaway and More Cause a Stir Off the Runway at Michael Kors Collection

To go about applying the traditional hair adhesive to your glitter-laden object, simply spread the garment out on a flat surface, with either a towel or bed sheet underneath it to absorb the stickiness from the hairspray. Make sure that the clothing item is laying completely flat, with no creases, and fasten all closures; i.e., zippers or buttons. Hold the can of aerosol hairspray about 10 inches from the surface and carefully mist away. For extra shiny security, wait for the first coating of hairspray to dry and then add another layer or two.

Wash sparkly clothes in cold water, on a delicate cycle

There’s always the option of taking your glitter-adorned dress to a dry cleaner, but you can also usually wash it in the comfort of your own home or at a laundromat as long as you try to reduce all potential causes of friction and use cold water. Glitter doesn’t do well when washed in warm temperatures, as the heat may melt the adhesive that holds the sparkles on. For a gentle machine wash, use a delicate cycle and throw the shiny article in by itself. However, if you’re big on saving water, you can wash the garment with other clothes as long as you turn it inside out to lessen the rubbing of the glitter against other fabrics.

Use a toothbrush to remove dirt from shiny footwear

Shoes kiss the dirty ground about a million times a day, and chances are, your new sparkly silver Chanel boots are no exception – unless of course they nest on a shrine over your bed. But for those who make good use of their finest party-girl footwear, you can remove any dirt, champagne spills or unrecognizable marks with a toothbrush and some cold water.

First, gently wipe down the shoes with a clean, soft cloth to dislodge any dried dirt. Then, prepare a mixture of cold water and soap and pour it into a bowl. Submerge your shoes in the water and very gently scrub the glitter using a toothbrush. Allow the shoes to dry and complete the job with another layer of protective hairspray.

Store in plastic bags

Store clothes and shoes adorned with glitter in plastic bags to keep the shiny flecks from falling off and leaving a trail all around your closet and bedroom. Glitter loves to cling to other materials, so containing the masses of sparkles will ensure that your wool knits and furry rugs don’t look like they’ve come in contact with a five-year-old’s arts and crafts table.

Who doesn’t love a fresh pair of white trainers? We all know the struggle of wearing your favourite white trainers without ruining the crisp clean aesthetic! But now you can wear them without the stress as we teach you how to whiten trainers easily! Here’s a little secret – did you know WD-40® is your ultimate go-to to get them looking like new again?

All types of shoes, including trainers, can gather a build-up of stubborn dirt and grime over time, but white trainers and shoes show up dirt far quicker than the rest. Throwing them in the washing machine can certainly help remove the majority of the dirt, but it’s time to say goodbye to stubborn grime such as oil, tar, or dare we say it, doggie doo? So, before you make the rash and frustrated decision to throw them in the bin, grab that handy bottle of WD-40 you’ve had stored away to help with cleaning white trainers!

How to Clean and Whiten Trainers

Yep, you heard us right. You may know that WD-40 is your trusted lubricant to remove rust from metal furniture or fix squeaks from door hinges, and although it may come as a surprise, it can actually be used to whiten trainers. To get the low-down on how to get them looking new again, read our step-by-step guide below:

What You Need to Whiten Trainers:

  • Dirty shoes
  • WD-40® Smart Straw Multi-Use
  • Dry clean cloth
  • Soapy water
  • Shoe cleaning brush

How To Clean White Trainers:

Firstly, clean the excess dirt and grime on your trainers with warm water and soap. Then, grab a shoe cleaning brush and brush away to loosen any hardened mud. Once you are happy, spray some WD-40 Multi-use Product Flexible Straw onto your shoe. Remember you can use the wide or precision spray function, depending on where the stain is. Use a microfibre cloth to work away any remaining grime. Finally, wipe the excess product off with a dry clean cloth. Et voila!

Pro Tip: Did you know that you can use WD-40 to waterproof your trainers? Read more in our article here: How To Waterproof Your Shoes.

Now that your trainers are looking brand-new again, it’s time to discover what else WD-40 can do for you. Read our blogs, how to remove chewing gum, the best way to clean paint brushes, or how to clean electrical contacts.